Mach 6 Pad 42cm

Its strengths begin where the mirco fibres stop.

It is almost in the Nano range!

The special properties of the Ha-Ra® Mach 6 are:

1. Extremely strong cleaning ability.
2. Has two water storage units, which can each discharge and absorb moisture.
3. It  has a high degree of capillary action and as a result, a very fine wetting action.
4. This wetting action is almost in the Nano range so it is ideal for use on high gloss surfaces.
5. Does not leave streaks after cleaning.
6. Light and easy to use.
7. Dirt rinses out easily.

User Information

Immerse the Mach 6 Floor Pad in water containing 1 - 2 drops of Hans Raab Formula, then slightly squeeze out on a vertical angle squeeze out in the Ha-Ra Press Butler.

Place the pad on the Ha-Ra® Floor Express and work in an "S" motion to clean and at the same time collect the moisture and the dirt that has been released by the fibres.

The Mach 6 Floor Pad is particularly suited to high gloss surfaces.

Suggested Uses

1. Lino
2. Marble
3. Sealed timber floors
4. Glazed tiles
5. Granite
6. Vinyl

Maintenance of the fibres

To remove fat and grease: The Mach 6 Floor Pad must be cleaned with warm water and pure soap, or preferably Ha-Ra® Saponella.

General cleaning: It is recommended that the Mach 6 Floor Pad is rinsed with running water or washed in the washing machine not hotter than 40 degrees C, usint the natural washing powder Ha-Ra® Saponella.

To maintian the fibres: It is recommended that 2 drops of Ha-Ra® Protective Formula be added to 2 - 3 litres of water in a bucket or the  Ha-Ra® Press Butler.