Mach 6 Pad 42.5cm

Its strengths begin where the mirco fibres stop.

It is almost in the Nano range!

The special properties of the Ha-Ra® Mach 6 are:

1. Extremely strong cleaning ability.
2. Has two water storage units, which can each discharge and aborb moisture.
3. It has as high degree of capillary action and as a result, a very fine wetting action.
4. This wetting action is almost in the Nano range so it is ideal for use on high gloss surfaces.
5. Does not leave streaks after cleaning.
6. Light and easy to use.
7. Dirt rinses out easily.

USER INFORMATION

Immerse the Mach 6 floorpad in water containing 1-2 drops of Hans Raab Protective Formula, then slightly squeeze out in the Ha-Ra® Pressbutler.

Place the pad on the Ha-Ra®  system  and work in an "S" motion to clean and at the same time collect the moisture and dirt that has been released by the fibres.

The Mach 6 Floor pad is particularly suited to high gloss surfaces.

SUGGESTED USES/AREAS OF APPLICATION

• Lino

• Marble

• Sealed timber floors

• Glazed tiles

• Granite

• Vinyl

The Mach 6 floorpad is particularly suited to high gloss surfaces

MAINTENANCE of the FIBRES

To remove fat, oil and grease: The Mach 6 floor pad must be cleaned with clean water and preferably Ha-Ra®  Saponella.

General cleaning: It is recommended that the Mach 6 Floorpad is rinsed with running water or washed in the washing machine not higher than 40 degrees C, using the natural washing powder Ha-Ra®  Saponella.

To maintain the fibres: It is recommended that 2 drops of Hans Raab Protective Formula be added to 2-3 litres of water in a bucket or the Ha-Ra® Pressbutler.

2 strong partners

Ha-Ra® Perfect 42.5 + Ha-Ra® Mach 6

The new Ha-Ra® Perfect 42.5 holder with the 6 chamber system, maximises the cleaning power of the Ha-Ra® Mach 6 up to 95% of its capacity resulting in a 30% time saving.